Airox Nigen the leaders in Adsorption Technology

Nitrogen Gas Plants           Hydrogen By PSA           Hydrogen By Water           Oxygen Gas Generator           Desiccant Air Drier           Ammonia Crackers           Bio Gas Systems           Compressed Air Systems           Air & Gas Purifiers           Compressors and Blowers           Engineering Services           Instrumentation           PLC Systems           Automation

Comp.. Air Systems

 

Capacity From

1 to 100 LPH

Upto 99.999 % Pure

To Read More Click Above

Capacity From

5 to 150 Nm3/hr

98 to 99.999 % Pure

To Read More Click Above

Capacity From

150 to 10000 Nm3/hr

98 to 99.999 % Pure

To Read More Click Above

Capacity From

500 to 2000 Nm3/hr

96 to 99.9 % Pure

To Read More Click Above

 

 

 

We offer optimal quality Heated Air Dryers which are highly efficient and accurate. Our Internally Heated Air Dryers    are made up of the best quality equipments and parts. We provide our Heated Air Dryers at competitive prices and   also well within the stipulated time. We are one of the authentic Heated Hot Air Dryers Exporters from India.

Used in instrument, fluid power, and process air applications, dryers can be used intermittently or continuously.     Dryers are often used for specialty gas drying including carbon dioxide for beverage production, nitrogen for     chemical padding and hydrogen drying.

Internally heated regenerative air dryer is the full line industrial duty internally heated regenerative air dryer.            The compressed air laded with moisture vapor enters the system through the right inlet valve and proceeds to       enter the desiccant bed through the stainless steel diffuser screen. The air flows up from the bottom of the tank to     the top allowing separated and condensed liquid to remain at the bottom of the vessel not contaminating the rest       of the desiccant.

The dehydrated compressed air then exits the right vessel through the top stainless steel diffuser screen, and past     the outlet check-valve. The adsorbent purge air enters the vessel in the primary heater tube flowing down while            it reaches regeneration temperature. It then enters the secondary heater tube where the purge flow returns to the top of the desiccant bed and flows down heating the desiccant bed and collecting moisture from the desiccant.

This dryer provides an efficient, economical and easy to maintain method of drying compressed air and gases. Available in flows from 150 through 3000 cfm, these models provide dry air through the efficient use of convection, conduction and radiant heat. A small amount of compressed air is used to dry the desiccant during the regeneration. The drying medium (Silica Gel or Activated Alumina) is contained in two carbon steel pressure vessels.

While chamber-1 is drying, air is passed over an electrical heater embedded in chamber-2 and carries out the disrobed moisture of this chamber. This type of system utilizes about 2-3% of the gas as a purge. It is an ideal system for gases requiring ultra low drying like dew-points up-to (-80°C). Each column remains in line for about 6 hours. For regeneration, the desiccant is heated for about 3 hours and then cooled for another 3 hours before changeover. The operation is fully automatic.

Airox Nigen Equipments Pvt. Ltd.

CORPORATE OFFICE :410, 4th Floor, Sarthik Square, Near Pizza Hut, Bodakdev, Ahmedabad,Gujarat-INDIA 380054.
Tel :+91-79-2684 2400- 2500 - 2600, Mobile : +91 9999623300, 09899343130,  sales@airoxnigen.com

PROJECT MANAGEMENT OFFICE :413-416 SPAZE- I-TECH PARK Sector-49, Sohna Road, Gurgaon Haryana 122001
Telephone: + 91 -124-423 0925 / 0926 / 0927, Mobile: +91- 9999493300 ,  Email: info@airoxnigen.com

REGIONAL OFFICE -  MUMBAI,   CHENNAI,   BANGALORE,  HYDERABAD,  VAPI

OVERSEAS OFFICE - MIDDLE EAST,  EUROPE, SINGAPORE, CHINA,  AMERICA  CANADA